There has been a 5'10'' fish blank sitting in my room for over 3 months just begging me to do something with it. Now with winter break in full swing I have finally had time to shape it. I was fortunate enough to get to shape it in the FOAM EZ shaping box. Its a great set up, there is literally every tool in there you need to correctly shape a surfboard. There is good lighting, the planer is hooked up to a vacuum for minimal foam dust, and even a small radio and c/d player to get your jam on. It got all the bells and whistles in it and its a convenient place to shape if you don't have an ideal set up at home like myself. I would recommend it to anyone who wants to shape a surfboard whether they are first timers or veteran shapers. Thanks Brad @ FOAM EZ for letting me use this great set up!
Because of the portable shaping bay this was the best surfboard I have ever shaped. Granted this is only my 9th one and I am not ashamed to say there is still probably some problems with it. Before using the FOAM EZ shaping box I would shape at home under insufficient lighting and making due with my limited tool resource. But now I can see after using the shaping box how much it helps to have proper lighting to see all of the lumps and imperfection in the blank when you are shaping. So it is for that reason that this surfboard has turned out better that the ones before.
I shaped a 5'7'' keel fin fish. 17" nose, 21 1/2'' wide, 16 3/4'' tail, and 2 5/8'' thick. I carried the thickness throughout the entire blank so it is a full shape and very buoyant. Which is what I intended because this is going to be my small wave board. After doing some research and looking up dimensions and outlines of other fishes my board is pretty standard, except for the tail. I came across a popular Australian shaper Daniel Thomson of Tomo Surfboards. He has studied the aerodynamics of fighter jets like the F-18 and has applied the same theories to surfboard design. This has allowed him to come up with some very interesting shapes and designs that seem to work very well. For fear that I will not explain his ideas correctly go to his website here tomosurfboards.com for more info. One particular aspect of his design that seemed to make sense was in his tail shapes. You can notice in the first picture the tail is not a traditional swallow tail. I turned the swallow design into two straight angles instead of a singl curve because Daniel Thomson's theory is that water flows faster off of straight edges and should therefore get a little more speed out of the board. I know that there is a lot more going on as far as foil and rocker goes in Daniel Thomson's shapes than what I did on this fish but I like his concept. I don't know if this tail shape will make a difference or not but the nice part about shaping your own board is giving this stuff a try because there is no lose if it doesn't work.
Next stage is fin placement and installation then onto glassing. I have decided to try my first resin tint on this board. So stay tuned for more updates on the process of my 5'7'' fish. This resin tint is either gonna make or brake the outcome of this board for me.
***All photos are courtesy of my friend Brian Kucera, check out his website briankucera.com**
-Daniel Thomson inspired tail
