Michael Lim's Nice quiver

5'11" H.I.C 80's twinzer fish. A mate bought it from ebay years ago, the 1st owner have it in his garage for 14 years before listing it on ebay. I took over when he became a Dad & unable to travel for waves.

5'4" Mini Arc tail quad by Yuta of Shaka Stics

5'9" DVS twin keels fish. Traded my 1978 Suzuki TS125 street scrambler motorbike w/ a buddy for it.

4'11" Half Moon tail mini-sim inspired twin keels by Yuta of Shaka Stics : http://shakastics.blogspot.com/

5'9" EHO quad fish w/101 bamboo fins, glassed by Moonlight Glassing : http://www.breaksselection.blogspot.com/

5'8" ODY Classic twin keel fish (my 1st fish shape in 2004) Ody was a backyard Mexican shaper that learnt his shaping skills in Cardiff by the Sea in San Deigo. After 9 years & a wife, he went back to Mexico & started his own surfshop at the famous Puerto Escondido "Mexican Pipeline" : http://www.odyboards.com/en/

5'5" double wings quad fish

Simmons built in Singapore to surf in Bali

Simmons under construction in a small apartment in Singapore

" This is Mike from Singapore. Yes, there are surfers in Singapore , an island with no waves but only 2 hrs flight from Indo & it's surf riches.
I be a follower of your "The Alley Fish Fry" blog & is smitten with all these alternative boards porn. I myself have quite a few fish type shape in my bunch. That's will be another mail altogether."

" Anyway,I thought I would share with you & the other devotees the stoke of my 1st hollow wooden mini-sim shaped and built by a buddy of mine Capt Tien aka Ali Bob as he was known in the FaceBook world.
Tien is a full fledge Singapore Airlines Pilot that where he get the Capt namesake from. True to his heart, he a tinker & all around Mr Craftsman, plus a pioneer figure in our minuscule Singapore surfing tribe.
So when he signed up late last year for the Grain's build your own workshop, I knew the end result from Maine will definitely sprout some wood seedling in our local water."

"So true to my believe, Tien has begun to start build his own hollow wooden boards after Maine. His 1st sole board on his own was a copy of his wifey's high performance fish shape which came out awesome looking in terms of built quality & shape but it didn't surf as well to his expectation due to some over-jess on the single to double concave bottom.... think bonzer on steroids!! Haha.."

"From the time he return from Maine, I have been implanting thoughts of a hollow wood Mini-Sim shape in his mind, knowing that he gravitate to the challenges of the shape's hull entry to single concave bottom & the scoop nose design. Tien bite the bait, took up the challenge last Nov & we started working on a Mini-Sim shape for me. I did most of the research/inputs from the internet, also asked my California shaper Yuta from the Shaka Stics label for his thoughts, advise & tips..."

"Got on Tien's Ass of the project management. Insist of having it at 5'2" & the scoop nose feature even though Tien thinking it will not work.
80% of the board structure form was build in Tien's spare bedroom apartment converted wood workshop. The balance rails, final finishing & epoxy glassing was done in Bali where he is based in when not flying."

" Board's dims is 5'2" x 21 3/4" x 2 5/8".
Deck strips are all in pine w/ 2 red cedar stringers.
Bottom are 2 stripe of pine, sandwiched w/ 2 red cedar stringers, finished w/ a local Indo wood similar to balsa. Rails are all Balsa. Hardwood tail block."

Twin keel fins in Birch plywood custom foiled by Yuta of Shaka Stic : http://shakastics.blogspot.com/

" Board is still in Bali now & I will be making a trip over end of May to fondle her rails & taking my 1st slide on her."

"Thanks for reading my long winded email. Hope you like how my board turned out & it will be great to be feature in your Alley Fish Fry blog."

Regards
MIKE LIM

Thanks Mike , it just shows where there is a will there is a way of building your dream board and it may be a little further to the beach than it is for most of us , but the wait will be worth it.We look forward to the surf report from Bali.

A Hollow wood Mini-Sim made in Singapore & finished in Bali.

" This is Mike from Singapore. Yes, there are surfers in Singapore , an island with no waves but only 2 hrs flight from Indo & it's surf riches.
I be a follower of your "The Alley Fish Fry" blog & is smitten with all these alternative boards porn. I myself have quite a few fish type shape in my bunch. That's will be another mail altogether."

" Anyway,I thought I would share with you & the other devotees the stoke of my 1st hollow wooden mini-sim shaped and built by a buddy of mine Capt Tien aka Ali Bob as he was known in the FaceBook world.
Tien is a full fledge Singapore Airlines Pilot that where he get the Capt namesake from. True to his heart, he a tinker & all around Mr Craftsman, plus a pioneer figure in our minuscule Singapore surfing tribe.
So when he signed up late last year for the Grain's build your own workshop, I knew the end result from Maine will definitely sprout some wood seedling in our local water."

"So true to my believe, Tien has begun to start build his own hollow wooden boards after Maine. His 1st sole board on his own was a copy of his wifey's high performance fish shape which came out awesome looking in terms of built quality & shape but it didn't surf as well to his expectation due to some over-jess on the single to double concave bottom.... think bonzer on steroids!! Haha.."

"From the time he return from Maine, I have been implanting thoughts of a hollow wood Mini-Sim shape in his mind, knowing that he gravitate to the challenges of the shape's hull entry to single concave bottom & the scoop nose design. Tien bite the bait, took up the challenge last Nov & we started working on a Mini-Sim shape for me. I did most of the research/inputs from the internet, also asked my California shaper Yuta from the Shaka Stics label for his thoughts, advise & tips..."

"Got on Tien's Ass of the project management. Insist of having it at 5'2" & the scoop nose feature even though Tien thinking it will not work.
80% of the board structure form was build in Tien's spare bedroom apartment converted wood workshop. The balance rails, final finishing & epoxy glassing was done in Bali where he is based in when not flying."

" Board's dims is 5'2" x 21 3/4" x 2 5/8".
Deck strips are all in pine w/ 2 red cedar stringers.
Bottom are 2 stripe of pine, sandwiched w/ 2 red cedar stringers, finished w/ a local Indo wood similar to balsa. Rails are all Balsa. Hardwood tail block."

Twin keel fins in Birch plywood custom foiled by Yuta of Shaka Stic : http://shakastics.blogspot.com/

" Board is still in Bali now & I will be making a trip over end of May to fondle her rails & taking my 1st slide on her."

"Thanks for reading my long winded email. Hope you like how my board turned out & it will be great to be feature in your Alley Fish Fry blog."

Regards
MIKE LIM

Thanks Mike , it just shows where there is a will there is a way of building your dream board and it may be a little further to the beach than it is for most of us , but the wait will be worth it.We look forward to the surf report from Bali.