Gluing commences, using epoxy resin and paulownia sanding dust
Sheet plastic keeps the bricks which hold everything in place from bonding to the wood
The nose is added
. . . and now the tail
The Baron 12 footer project 2
Internal frame panel #1 this one will support the deckAfter laying out the blocks and frames for the middle section of the panel, we secure the frame and blocks at one end of the section we are about to glue together, and then pull the rest of the components back a little bit to allow enough room to work.The ends of the panel have not yet been made, Gluing tends to make the panel creep in length, so it's best to make the middle of the panel first and then add the ends afterwards.
Gluing commences, using epoxy resin and paulownia sanding dust
Sheet plastic keeps the bricks which hold everything in place from bonding to the wood
The nose is added
. . . and now the tail
Gluing commences, using epoxy resin and paulownia sanding dustSheet plastic keeps the bricks which hold everything in place from bonding to the woodThe nose is added. . . and now the tail
