Showing posts with label fins. Show all posts
Showing posts with label fins. Show all posts

Roachy’s EVO6 bonzer rears

Well just before the docs said no power tools for 2 weeks whilst my tendons, blood vessels and ligaments repair… I had foiled Roachy’s rear FCS fit EVO6 bonzer set cores… and was just about to glass them when Frosties delivered its dawn blow. Here’s the story so far… wood cores in American Ash ready for glassing. They will have a 1/2” halo after re-foiling with a lacquer finish. 

P1050621

P1050617

I’ll be making more sets of these for anyone who is interested in a light, wood core (positive buoyancy), dual foil fin of this unique planshape. FCS fit or Lockbox, you choose. £80 a set.

FreakFish FCS EVO6 bonzer review

The Mentawais FreakFish was set up with FCS bonzer fronts and a set of FreakFish FCS fit rears… and i am pleased to say the board flew and the FCS system handled all the torque with no problems at all. The board was incredibly fast down the line allowing sections to be made with ease, whilst still allowing for sudden changes of direction with full power being transferred through the rail. They say the proof is in the eating and the FreakFish certainly proved itself being ridden more than any other board. The conditions were small so sections were more frequent and the FreakFish allowed these to be made with ease. A really flexible design that has become the board i ride more than any other, whether it is beach breaks in the UK or reefs and points from Mexico to Indo.

The Riddler – REVO5 bonzer

This board was inspired by some of the most significant influences on my shaping… Malcolm Campbell’s bonzers of course, a little bit of McCoy’s loaded dome Nuggets and a healthy dose of Cheyne Horan’s boards and the spitfire theories from Revolution...

6’2” x 20 1/2” x 2 7/8” – rolled deck with pinched rails. Rolled V boat-nose into vortex channel inside rolled V, exiting into a panel V through the tail. REVO bonzer spitfire sides and  a McCoy gullwing centre fin. Can be ridden as a Single fin or as a REVO5.

The REVO sides are using the fluid dynamic theories more popular in sailing after the Ben Lexcan keel led the Australia II to the America’s Cup victory in 1980. One part of the theories is that a vertical keel has less resistance than a sloped one due to its reduced initial contact area. Anyways thought it was time to apply some of this to a board and inspired by something similar on a Revolution Board and with encouragement from Noel Whitman of Revolution the Riddler was born. Watch out for tweaks in the near future after its first wetting.

Hope you enjoy.

P1050011 P1050019 P1050023 P1050024 P1050020 P1050016

Atlantic POD with twin-CRV symmetrical foil rears

Had the Atlantic POD EVO6 bonzer out in some fun surf the other day and it flies. Waves were overhead and clean with almost no wind… some lovely peaks with long rides and plenty of wall. The board has really quick wave entry with the fins offering low drag and heaps of drive off the bottom. Faded bottom turns no problem with excellent hold; cutbacks kept a decent amount of speed through the turn. These fins seem to be really neutral handling, predictable and have a great balance between drive and hold.

Rode them another day at another spot, a little more hollow and quick and the fins were equally good but perhaps a little less control in the steeper stuff. A conventional shape would have offered a little more control and less drive – which would have worked well on that day as the board was outrunning the curl a bit too easily.

More reviews on the other set-ups when the surf comes back.

P1040977

fREAKfISH… wooden EVO6 bonzer gets stained…

Just a little wood staining to finish off Pete’s FreakFish EVO6 bonzer 5’11”. Now back with Mark of Glass Tiger for the final varnish and fin- glossing before it heads up to Scotland for some real juice.

wooden-bonzer-EVO6

FreakFish EVO6 bonzer gets woody..

Ready for burn pen, stains and varnish before it heads north for some Scottish juice. Great work by Mark at Glass Tiger on the construction as always…

fins back

SOLD: Atlantic POD bonzer EVO5/6 – your flexible friend

EVO5 bonzer The Atlantic POD - Tim Stafford Custom Surfboards, Cornwall

Traditional bonzer EVO5 set-up:

For those who love the pivot and smooth rail to rail transition of the traditional bonzer set up. EVO5 features changes to the bonzer side fins for additional drive in slower lower energy waves typically found in the UK.  This set up is well suited to any size surf and will deliver the typical bonzer experience.

EVO6 bonzer set-up:

EVO6 bonzer Atlantic POD - Tim Stafford Custom Surfboards, CornwallThis is ideal for beach breaks where you want to get immediate drive mid face to get going down the line. Using FCS MR side fins to replace the single fin there is heaps of drive and hold. Suited to power surfers and those who like plenty of fin to push against.

 

Arc EVO6 bonzer for smaller waves:

EVO6 bonzer with CRV sides - Tim Stafford Custom Surfboards, CornwallThis fin allows more easy rail to rail transitions than a conventional fins. The curved profiles have less resistance to go from rail to rail, and therefore it feels more like a single fin bonzer, but with the extra initial drive of the twin rear fins. Ideally suited to smaller, slower waves as the fins offer less resistance to turn.

ARC2 EVO6 bonzer for smaller waves:

EVO6 bonzer with CRV rears - Tim Stafford Custom Surfboards, CornwallWant the lower resistance but with increased stability, this set up utilises 2 of the rear G-CRV fins, providing a stable but more pivotal experience than the standard EVO6 set-up. Great in more hollow waves for late drops into the barrel and subtle adjustments in the pocket.

 

Other set-ups:

It really is a matter of personal taste and everyone who has ridden these boards tends to have a different favourite. Try using 2 symmetrical FCS G5 rears for easier turning than the conventional set up. Use Quad asymmetrical foil sides as your rears for more drive. That really is the beauty, experiment and find your favourite. What is proven is that by splitting the rear bonzer single fin effectively in two, and placing them out to the rails the board responds more quickly in terms of drive and that this makes them much more usable in fast beach breaks where you don’t always have the luxury of starting off with a nice bottom turn.
EVO6 bonzer with CRV sides - Tim Stafford Custom Surfboards, Cornwall

Horan-McCoy Nugget bonzer spitfire….

Not one of mine, but something about this design just screams – “try me!”

Its from the ProBox fins site/blog and the templates (board and fins) are pure McCoy/Horan, with a little reverse Campbell Bros thrown in.

The reverse (to norm) foil is meant to be the lowest drag option, which is why this is a more common shape on boats now than swept back like a conventional surfboard fin.

I had the best barrels of my life on my McCoy Nugget in both Indo and the Caribbean. I guess I may have to make a version in the very near future, add the EVO vortex bottom, foil up a spitfire fin… find some decent waves to try it in – watch this space…

solo horan 012

What year am I going back to with this one Phil? Smile


Finished laminating the four fin fish. Now it's ready for sanding.
David setting up some future fins on this quad.


We're still making custom fins for our nose riders. It's good because we can make the fins to match the boards and change fin shapes quickly to fine tune ideas.

I always like the way clear fins look.





Got some fresh fins from Larry Gephart, hand foiled here in San Diego.

Anyone Lose a Fin?

Found this kelp encrusted 9" Rainbow fin while free diving Steamer Lane the other day. We've had a really good run of crystal clear water lately. With a lot of the sand scraped off the reefs, it's been perfect for poking around the nooks and crannies on the smaller days.

Single Fin Red

This board came out sweet. Wide point forward and crisp edges throughout. The Rainbow 7.5 TK Flex really ads spring and pop to the ride.
Hand foiled fins by Larry Gephart on top, production made fins by Larry on the middle board and hand foiled fins by Daniel Partch on the bottom board. I always prefer the hand foiled fins myself.


David gettin some fin work done today. Our favorites - quads.?



Just finished a new nose rider that I shaped for Dennis.
We made a custom "D" fin to go on it that Dennis designed and foiled.
Daniel showin some of his fins on a Frye.