The Riddler – REVO5 bonzer

This board was inspired by some of the most significant influences on my shaping… Malcolm Campbell’s bonzers of course, a little bit of McCoy’s loaded dome Nuggets and a healthy dose of Cheyne Horan’s boards and the spitfire theories from Revolution...

6’2” x 20 1/2” x 2 7/8” – rolled deck with pinched rails. Rolled V boat-nose into vortex channel inside rolled V, exiting into a panel V through the tail. REVO bonzer spitfire sides and  a McCoy gullwing centre fin. Can be ridden as a Single fin or as a REVO5.

The REVO sides are using the fluid dynamic theories more popular in sailing after the Ben Lexcan keel led the Australia II to the America’s Cup victory in 1980. One part of the theories is that a vertical keel has less resistance than a sloped one due to its reduced initial contact area. Anyways thought it was time to apply some of this to a board and inspired by something similar on a Revolution Board and with encouragement from Noel Whitman of Revolution the Riddler was born. Watch out for tweaks in the near future after its first wetting.

Hope you enjoy.

P1050011 P1050019 P1050023 P1050024 P1050020 P1050016